MGate 4101-MB-PBS

MGate 4101-MB-PBS

Datasheets Datasheets Manual Manual Drivers Drivers Larger Image Larger Image

Features and Benefits

  • Protocol conversion between Modbus and PROFIBUS
  • Windows utilities with innovative QuickLink function for automatic configuration
  • Redundant dual DC power inputs and relay output supported
  • Embedded data packet analyzer
  • Powerful and visual diagnostic tool
  • -40 to 75°C wide operating temperature models available

 

 

Overview

MGate 4101-MB-PBS series products connect Modbus and PROFIBUS devices to provide PLCs (e.g. Siemens S400 and S300 PLCs) with remote maintenance capability. All models are ruggedly constructed with metal design, are DIN-rail mountable, and offer optional built-in optical isolation for serial signals.

 

Windows Utilities for Easy Setup and Traffic Monitoring

The QuickLink windows utilities makes configuration and operation of the MGate 4101-MB-PBS as easy as possible. The utility uses a serial console port to connect MGate 4101-MB-PBS unit. The QuickLink function can help you finish configuration in just few minutes by performing automatic commands detection and automatic memory mapping. In addition, an embedded monitoring tool can record all communication packets of Modbus devices and and assist in troubleshooting.

 

Redundant Power Inputs

The MGate 4101-MB-PBS has dual power inputs for greater reliability. The power inputs allow simultaneous connections to two live DC power sources, so that continuous operation is provided even if one power source fails. The higher level of reliability makes these advanced Modbus-to-PROFIBUS gateways ideal for demanding industrial applications.

 

Warning by Relay Output

A relay output is provided for the power input status. The relay output gives maintenance engineers an additional tool for troubleshooting and maintenance.
 PROFIBUS Interface
Protocol
PROFIBUS DP-V0 Slave
Number of Ports
1
Data Rate
9600 bps to 12 Mbps
Connector
DB9 female
Isolation
Built-in (2KV)
DIP Switch
For Termination
Rotary Switch
PROFIBUS address 0-99 (address 100-125 supported by SW)
• Modbus Serial Interface
Number of Ports
1
Serial Standards
RS-232/422/485, software selectable
Connectors
DB9 male
ESD Protection
15 KV for all signals
RS-485 Data Direction Control
ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485
1 KΩ, 150 KΩ
Terminator for RS-485
120 Ω
Data Bits
7, 8
Stop Bits
1, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS, DTR/DSR (RS-232 only)
Baudrate
50 bps to 921.6 Kbps
• Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
• Software
Operation Modes
RTU Slave, RTU Master, ASCII Slave, ASCII Master
Configuration Options
Web Console, Serial Console, Telnet Console, Windows Utility
Utilities
MGate Manager for Windows 98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64
Bonus Features
QuickLink, Paging
• Physical Characteristics
Housing
Metal
Weight
500 g
Dimensions
36 x 105 x 140 mm (1.42 x 4.13 x 5.51 in)
• Environmental Limits
Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
• Power Requirements
Input Voltage
12 to 48 VDC
Power Connector
Terminal block
Power Consumption
MGate 4101-MB-PBS: 340 mA @ 12 VDC, 130 mA @ 48 VDC
MGate 4101I-MB-PBS: 375 mA @ 12 VDC, 140 mA @ 48 VDC
• Standards and Certifications
Safety
UL 60950-1, EN 60950-1
EMC
CE, FCC
EMI
EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8,
EN 61000-4-11,
EN 61000-4-12
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-23
Vibration
IEC 60068-2-6
• Reliability
MTBF (mean time between failures)
513,139 hrs
• Warranty
Warranty Period
5 years
Details