AWK-4131
AWK-4131
Features and Benefits
- IEEE 802.11a/b/g/n compliant
- One M12/SFP Gigabit combo port
- Up to 300 Mbps data rate
- Supports 100 ms Turbo Roaming
- MIMO technology increases data throughput and range
- Rugged IP68-rated housing and -40 to 75°C operating temperature range (-T model)
Introduction
Moxa’s new AWK-4131 is a 3-in-1 industrial wireless AP/bridge/client that meets the growing need for faster data transmission speeds and wider coverage by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-4131 combines two adjacent 20 MHz channels into a single 40 MHz channel to deliver a potent combination of greater reliability and more bandwidth. With a wide -40 to 75°C operating temperature and dust-tight/weatherproof IP68-rated design, the AWK-4131 allows you to extend existing wired networks to outdoor locations. The AWK-4131 can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.
- Higher Data Rate and Greater Bandwidth
- High-speed wireless connectivity with up to 150 Mbps data throughput
- MIMO technology to improve the capacity of multiple data stream transmits and receives
- Increased channel width with channel bonding technology
- Industrial and Outdoor Features for Critical Environments
- Industrial-grade QoS and VLAN for efficient data traffic management
- IP68-rated metal housing and -40 to 75°C wide operating temperature
- PoE and dual DC power inputs
|
WLAN Interface
|
|
|
Standards
|
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT(X) IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q VLAN |
|
Spread Spectrum and Modulation (typical)
|
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps • 802.11n: 64QAM @300 bps to BPSK @ 6.5 Mbps (multiple rates supported)
|
|
Operating Channels (central frequency)
|
US:
2.412 to 2.462 GHz (11 channels) 5.18 to 5.24 GHz (4 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.18 to 5.24 GHz (4 channels) JP: 2.412 to 2.472 GHz (13 channels, OFDM) 2.412 to 2.484 GHz (14 channels, DSSS) 5.18 to 5.24 GHz (4 channels for W52) |
|
Security
|
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES) |
|
Transmission Rates
|
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6 to 300 Mbps (multiple rates supported)
|
|
TX Transmit Power (
|
802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g: 6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
|
|
RX Sensitivity
|
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
|
|
TX Transmit Power MIMO
|
802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
MCS15 40 MHz: Typ. 12 dBm (± 1.5 dBm)
802.11g/n (20/40 MHz):
MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)
MCS15 40 MHz: Typ. 13 dBm (± -1.5 dBm)
|
|
RX Sensitivity MIMO
|
802.11a/n:
-68 dBm @ MCS15 40 MHz,
-70 dBm @ MCS7 40 MHz,
-69 dBm @ MCS15 20 MHz,
-71 dBm @ MCS7 20 MHz
802.11g/n:
-68 dBm @ MCS15 40 MHz,
-70 dBm @ MCS7 40 MHz,
-69 dBm @ MCS15 20 MHz,
-71 dBm @ MCS7 20 MHz
|
|
• Protocol Support
|
|
|
General Protocols
|
Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
|
|
AP-only Protocols
|
ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
|
|
• Interface
|
|
|
Default Antennas
|
2 dual-band omni-directional antennas, 5 dBi at 2.4 GHz, 2 dBi at 5 GHz, N-type (male)
|
|
Connector for External Antennas
|
N-type (female)
|
|
LAN Ports
|
1, 10/100/1000BaseT(X), auto negotiation speed (M12 female type)
|
|
Fiber Ports
|
1, 1000BaseSFP slot
|
|
Console Port
|
RS-232 (waterproof RJ45-type)
|
|
LED Indicators
|
PWR, FAULT, STATE, WLAN, LAN
|
|
Alarm Contact (digital output, M12 female connector)
|
1 relay output with current carrying capacity of 1 A @ 24 VDC
|
|
Digital Inputs (M12 female connector)
|
2 electrically isolated inputs
• +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA |
|
• Physical Characteristics
|
|
|
Housing
|
Metal, IP68 protection
|
|
Weight
|
1.8 kg
|
|
Dimensions
|
224 x 147.7 x 64.5 mm (8.82 x 5.82 x 2.54 in)
|
|
Installation
|
Wall mounting (standard), DIN-Rail mounting (optional), pole mounting (optional)
|
|
• Environmental Limits
|
|
|
Operating Temperature
|
-40 to 75°C (-40 to 167°F)
|
|
Storage Temperature
|
-40 to 85°C (-40 to 185°F)
|
|
Ambient Relative Humidity
|
5% to 100% (non-condensing)
|
|
• Power Requirements
|
|
|
Input Voltage
|
12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
|
|
Connector
|
M12 connector with A-coding
|
|
Power Consumption
|
12 to 48 VDC, 890mA (max.)
|
|
Reverse Polarity Protection
|
Present
|
|
• Standards and Certifications
|
|
|
Safety
|
UL 60950-1, EN 60950-1
|
|
EMC
|
EN 301 489-1/17, FCC Part 15 Subpart B Class B, EN 55022/55024
|
|
Radio
|
EN 300 328, EN 301 893, DSPR (Japan)
|
|
Rail Traffic
|
EN 50155 (Pending), EN 50121-1/4
|
|
Note
|
Please check Moxa’s website for the most up-to-date certification status.
|
|
• Warranty
|
|
|
Warranty Period
|
5 years
|
|
Details
|
|